Products | NAWA Global

Lubricant/grease

TF-15® High-Pressure PTFE Thread Sealant

The TF-15 PTFE formula aids in the make up of large-diameter casing by providing a lower coefficient of friction than API-MODIFIED. TF-15 provides excellent protection against galling and wear, seals badly worn threads and greatly increases connection life. This sealant is recommended for use as a sealant on fiberglass tubing and casing threads as well as VAM BIG OMEGA. TF-15 is particularly useful in areas subject to H2S and salt water and in applications subject to vibration, pressure surge and temperature fluctuations. Rating: Temperatures up to 600°F (315°C), Pressures up to 10,000 psi

View details

Lubricant/grease

API-MODIFIED Thread Compound Sealant

API-MODIFIED is a high-pressure thread compound that conforms to and exceeds the requirements of API Bulletin 5A2 and R.P. 5A3. It is formulated with JET-LUBE’s unique grease base, which tenaciously adheres to wet or oily surfaces and provides brushability throughout the service range. API MODIFIED seals and withstands pressures to 10,000 psi, on API connections and greater on mechanical seal designs. It resists wash-off and will not harden or dry. Rating: 0°F (-18°C) to 400°F (205°C)

View details

Lubricant/grease

MODIFIED-LZF™ Lead/Zinc-Free High-Pressure Thread Compound

MODIFIED-LZF is a patented, high-pressure sealant and anti-seize compound designed as a lead-free alternate for API-MODIFIED. MODIFIED-LZF, formerly known as ENVIRO-SAFE was first introduced into the market in 1989. The compound contains copper flake and graphite as well as other nonmetallic, inorganic, extreme pressure, and anti wear additives. It has a balanced package of rust, corrosion, and oxidation inhibitors blended into a high-quality aluminum complex base grease. The aluminum complex grease provides a high melting point and excellent inherent water resistance; allowing it to stick to wet steel and ensuring that the compound will not wash off threads. Rating: 0°F (-18°C) to 450°F (232°C)

View details

Lubricant/grease

Z-50™ Zinc Tool Joint Compound

Z-50 contain varying percentages of prime-grade metallic zinc dust along with other special additives. They ensure consistent floor make up and are brushable over a wide temperature range. Z-50 adhere to all surfaces, resist water wash-off and prevent rust and corrosion. Rating: 0°F (-18°C) to 300°F (149°C)

View details

Lubricant/grease

SEAL-GUARD™ Proprietary Connection Thread Compound

This nonmetallic thread compound design provides optimum galling resistance and frictional properties in the make up of high-chrome, proprietary designs (metal to metal seals, as well as API 8 round designs). Rating: -20ºF (-29ºC) to 450ºF (232ºC) Friction factor 0.9 relative to API-MODIFIED • Low volatility at temperatures up to 232°C

View details

Lubricant/grease

RUN-N-SEAL® EXTREME® AWG All Weather Grade Thread Sealant

RUN-N-SEAL EXTREME AWG is a metal-free, high pressure sealant alternative versus API-MODIFIED for OCTG 8-round and buttress connections. This compound contains graphite and other nonmetallic, inorganic, anti-wear additives blended into a state-of the-art, all weather, rust inhibiting complex soap based grease. Nontoxic. H2S inhibited • Rating: 40°F (-40°C) to 450°F (232°C) Friction factor 0.9 relative to API-MODIFIED

View details

Lubricant/grease

RUN-N-SEAL® EXTREME® Running & Storage Compound

RUN-N-SEAL EXTREME is a nonmetallic, high pressure sealant for API connections (buttress and 8-round) and storage compound. This compound is not intended for use on mechanical seal connections. RUN-N-SEAL EXTREME contains graphite and other nonmetallic, inorganic, anti-wear additives blended into a state-of-the-art, high temperature, rust-inhibiting complex soap-based grease. RUN N-SEAL EXTREME has been tested for California Code and is not classified as a hazardous waste. It is nontoxic, even in a marine environment, as evidenced by test results on the California Hazardous Waste Assessment Bioassay and a “D” rating in the North Sea (OSPAR) Guidelines. Rating: 0°F (-18°C) to 450°F (232°C) • Friction factor 0.9 relative to API-MODIFIED

View details

Lubricant/grease

HPHT Thread Compound™ High Pressure / High-Temp

HPHT Thread Compound is specifically formulated to meet high performance requirements of proprietary, metal-to-metal seal and interference connection designs. This compound utilizes today's high-performance materials, which include "super chrome" and high-alloy steels. high Biodegradable • Ideal for high-chrome connections • Eco-safe • Metal-free

View details

Lubricant/grease

CURÄL™ Work Over / Non-Critical Tool Joint Compound

CURÄL is a thread compound developed for non critical drilling, work over and production applications. Nonmetallic, environmentally acceptable, special additives enable CURÄL to also be used for lubricating, sealing and storage of drilling and production equipment. It can also be used as an alternative to API-MODIFIED on carbon steel alloys. Rating: 0°F (-18°C) to 450°F (232°C) Note: Not for use on mechanical seal designs.

View details

Lubricant/grease

KOV'R-KOTE® Double-Duty Tool Joint Compound / Sealant

The unique blend of polymers, graphite and friction reducing additives makes KOV’R-KOTE ideal for drill collars, drill pipe and tubing and it can be used for bottom hole assemblies. This metal-free formula was developed to replace compounds containing zinc, copper and heavy metals with similar frictional properties. While maintaining multifunctional capabilities, KOV’R-KOTE is recommended for use on shouldered and interference threads and is ideal for small and large diameter drill pipe. Rating: 0°F (-18° C) to 450°F (232° C) • NSF H2 Registered

View details

Need a product or a quote?